[
	{
		"post_id": "68", 
		"post_category_id": "10", 
		"post_title": "OEM Plus VL & VK Commodore Boot Liner", 
		"post_content_short": "Custom boot interior trim panels designed for VK and VL Commodore applications, combining CAD-designed MDF front and side panels with a 3D\n\tprinted rear panel to cover the interior of the tail light housings. Designed to work with the existing boot structure, providing a clean,\n\ttailored finish for a custom upholstered interior.\n", 
		"post_icon": "https:\/\/www.interaktiv.com.au\/media\/website_posts\/68\/vk-boot-liner.webp", 
		"post_content_type": "page", 
		"post_content_url": "https:\/\/www.interaktiv.com.au\/projects\/oem-plus-vl-and-vk-commodore-boot-liner\/", 
		"post_date": "2026-10-31 11:38:50"
	}, 
	{
		"post_id": "67", 
		"post_category_id": "10", 
		"post_title": "Beefy Patrol Bullbar", 
		"post_content_short": "3D scanning and CAD development of a custom GU Patrol bullbar for NC Fab. Starting from their existing 80 Series Cruiser bullbar design, I\n3D scanned the Patrol and adapted the original design cues to suit the GU while retaining the same overall style and features.", 
		"post_icon": "https:\/\/www.interaktiv.com.au\/media\/website_posts\/67\/patrol-bullbar.webp", 
		"post_content_type": "page", 
		"post_content_url": "https:\/\/www.interaktiv.com.au\/projects\/beefy-patrol-bullbar\/", 
		"post_date": "2026-09-28 04:16:55"
	}, 
	{
		"post_id": "66", 
		"post_category_id": "10", 
		"post_title": "High Clearance Control Arms", 
		"post_content_short": "A high-clearance lower control arm designed for a Can-Am SxS, using welded 5mm and 3mm mild steel construction with tab-and-slot features\nfor accurate, straightforward assembly. Internal bracing adds rigidity and strength while maintaining ground clearance.", 
		"post_icon": "https:\/\/www.interaktiv.com.au\/media\/website_posts\/66\/canam-control-arm.webp", 
		"post_content_type": "page", 
		"post_content_url": "https:\/\/www.interaktiv.com.au\/projects\/high-clearance-control-arms\/", 
		"post_date": "2026-09-28 03:48:55"
	}, 
	{
		"post_id": "65", 
		"post_category_id": "10", 
		"post_title": "Special Centre Console", 
		"post_content_short": "Custom centre console designed around a modified 1961 EK Holden Special interior, combining 3D scanning, CAD development and 3D printed\ncomponents.", 
		"post_icon": "https:\/\/www.interaktiv.com.au\/media\/website_posts\/65\/eh-holden-center-console.webp", 
		"post_content_type": "page", 
		"post_content_url": "https:\/\/www.interaktiv.com.au\/projects\/special-centre-console\/", 
		"post_date": "2026-09-24 02:42:49"
	}, 
	{
		"post_id": "64", 
		"post_category_id": "10", 
		"post_title": "Eight Six Rear Spoiler", 
		"post_content_short": "An entirely original design duck-bill rear spoiler developed from a 3D scan of the Toyota 86, combining 3D printed components with a\nCNC-cut perspex centre section.", 
		"post_icon": "https:\/\/www.interaktiv.com.au\/media\/website_posts\/64\/86rearwing.webp", 
		"post_content_type": "page", 
		"post_content_url": "https:\/\/www.interaktiv.com.au\/projects\/eight-six-rear-spoiler\/", 
		"post_date": "2026-09-24 01:03:15"
	}
]